Kingston ValueRAM 8GB DDR4-3200 Notebook RAM
Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals Low-power auto self-refresh (LPASR) Data bus inversion (DBI) for data bus On-die VREFDQ generation and calibration Single rank On-board I2 serial presence-detect (SPD) EEPROM Power Supply: VDD = 1.2V Typical
JD19
- Brand: Kingston
- Shipping:
Learn More
DESCRIPTION
KINGSTON 8GB DDR4 3200MHz NOTEBOOK RAM
- Nominal and dynamic on-die termination (ODT) for
- data, strobe, and mask signals
- Low-power auto self-refresh (LPASR)
- Data bus inversion (DBI) for data bus
- On-die VREFDQ generation and calibration
- Single rank
- On-board I2 serial presence-detect (SPD) EEPROM
- Power Supply: VDD = 1.2V Typical
| Capacities | Single 8GB |
| Frequencies | 3200MHz |
| Latencies | CL22 |
| Voltage | 1.2V |
| Operating temperature | 0°C to 85°C |
| CL(IDD) | 22 cycles |
KINGSTON 8GB DDR4 3200MHZ NOTEBOOK RAM
This document describes ValueRAM’s KVR32S22S6/8 as a 1G
x 64-bit (8GB) DDR4-3200 CL22 SDRAM (Synchronous
DRAM), 1Rx16, memory module, based on four 1G x 16-bit
FBGA components. The SPD is programmed to JEDEC
standard latency DDR4-3200 timing of 22-22-22 at 1.2V. This
260-pin SODIMM uses gold contact fingers.
The electrical and
mechanical specifications are as follows:
- On-board I2 serial presence-detect (SPD) EEPROM
- 8 internal banks; 2 groups of 4 banks each
- Fixed burst chop (BC) of 4 and burst length (BL) of 8
- via the mode register set (MRS)
- Selectable BC4 or BL8 on-the-fly (OTF)
- Fly-by topology
- Terminated control command and address bus
- PCB: Height 1.18” (30.00mm)
- RoHS Compliant and Halogen-Free
