Left Panel:Fully Transparent Adapter & Place:E-ATX/ATX/MICRO ATX / Under the case Suitable Motherboard:MICRO ATX/MINI ITX
LANCOOL 215 features two pre-installed 200MM ARGB fans and a 120MM fan, combining with mesh panels, honeycomb vents enable efficient ventilation. Equiped with two 200mm ARGB fan and one 120 fan at the rear. The mesh panel in the front creates a great airflow without bring the dust in. Include top and bottom honeycomb filtered vents, wide fan/radiator combination support, and multiple cable management solutions for the DIY users to fit their configuration.
ABKONCORE Helios H500G 200mm RGB Fans and 120mm RGB Fan, Two Side Tempered Glass
3X ARGB HALO Fans and 120mm REAR ARGB HALO Fan Tempered Glass
[LIGHT UP THE SYSTEM] – 2 Pre-installed 200mm 5V Motherboard Sync ARGB fans + ARGB light bar at front panel (Sync with Asus Gigabyte MSI ASRock Biostar that has 5V addressable RGB header) [BUILT-IN DUAL MODE 5V ARGB SWITCH BOARD] – Control light via I/O port button (27 LED modes/7 Colors) or via 5V ARGB Sync motherboard RBG software [27 LED MODES via I/O PORT] – Wave mode/ Flow mode/ RGB lighting (single color)/ Radar mode (Red yellow green Cyan blue White Purple)/ Breath mode (8 Colors)/ Full Lighted mode/ Single Color mode (7 Colors)/ Light Off [PATENTED ROTATIONAL PCI-E 8 SLOTS DESIGN] – With patented rotational PCI-E slots you can choose the way you want to display graphic cards vertically or horizontally [WINDOW PSU COVER] – Special ventilated design enhances airflow and hides unsightly cables [2+2+1 DRIVE BAY] – 2 5″/3 5″ x 2 with HDD Rack + 2 5″ x 2 with HDD Bracket + 2 5″/3 5″ x 1 behind MB Tray Supports Mini ITX Micro ATX ATX Motherboard
Mid-tower case with tempered glass side panel and two preinstalled 20cm 5V ARGB front fans and one 12cm standard rear fan, supporting up to ATX MB.
Mesh and Transparent Front Panel – Both the mesh and transparent front panel are included for maximized airflow and offering a crystal-clear view of the fans Dual 200mm ARGB Fans – The iconic, addressable RGB fans are the core of the H-Series in design and function, capable of operating quietly while moving high volumes of air due to their size ARGB Lighting System – The pre-installed ARGB fans can be managed by either the motherboard or an included controller, connected by the included splitter, to create a comprehensive ARGB lighting system Tempered Glass Side Panel – Gaming hardware, custom-loop cooling, and the pure pride of the builder is shown in panoramic view through an edge-to-edge tempered glass side panel Optimized Airflow – Filtered ventilation on the top panel provides additional thermal support while also offering mounting options for future cooling upgrades
Mid-tower case with tempered glass side panel and two preinstalled 200mm 5V ARGB LED front fans and one 120mm standard rear fan, supporting up to ATX MB.
Mid-tower case with tempered glass side panel and two preinstalled 200mm 5V ARGB front fans and one 120mm standard rear fan, supporting up to ATX MB.
Light up the system: 3 Pre installed 120 millimeter 5V MB Sync ARGB fans (Sync with Asus, Gigabyte, MSI) +1 rear black fan Built in dual mode 5V ARGB switch board: control light via I/O port button (27 LED modes/7 Colors) or via 5V ARGB Sync motherboard 27 LED modes through I/O port button: wave mode; flow mode; RGB lighting (single color); Radar mode (Red, yellow, green, Cyan, blue, White, Purple); breath mode (8 Colors); full lighted mode; single color mode (7 Colors); light off Clear view of PC gaming: two 4 millimeter tempered glass (left & Front) with standard mounting Built in PSU cover: Cover all your cables for a professional look 6 Drive Bays: 2. 5 inches Ssd x 6 or 2. 5 inches X 4 + 3. 5 inches X 2 Supports Mini ITX, Micro ATX, and ATX motherboard
ATX mid-tower chassis with one 4mm thick left tempered glass window, three preinstalled 120mm ARGB front fan and one 120mm rear fan.
Thermaltake V250 TG ARGB is a mid-tower chassis that comes with three preinstalled 120mm ARGB front fans, one preinstalled 120mm standard rear fan, and can support up to a standard ATX Motherboard.
The Thermaltake View 51 TG ARGB is a specially constructed full tower case from the View Series chassis which comes with two preinstalled 200mm 5V ARGB fans at the front, one preinstalled 120mm 5V ARGB fan at the rear, and can support motherboards up to E-ATX (up to 10.5” wide).
Case Form Factor Mid-Tower Material Steel Plastic Tempered glass Motherboard supporting ATX Micro-ATX Mini-ITX Expansion Slots 7 Internal 2.5" Bays 2 Internal 3.5" Bays 2 Bays 120mm Fan Mount Pre-installed Fan(s) Front: 120mm ARGB Fan x 3 Rear: 120mm x 1 Fan Support Top: 120mm x 2 / 140mm x 2 Front: 120mm x 3 / 140mm x 2 (can only mount behind the front plate) Rear: 120mm x 1 I/O Interface USB 3.0 x 2 Audio In / Out RGB Control RGB controller included 1 to 3 RGB splitter cable included Case specification link http://www.coolermaster.com/case/mid-tower/masterbox-mb511-Argb/
Fine Mesh Front Panel: Cooler Master’s Fine Mesh design on the front panel is proven to provide proficient airflow while filtering out dust. Mesh Intakes: Large, mesh intakes span each side of the front panel to provide additional airflow to system. Dual ARGB Fans: Dual pre-installed 120mm ARGB fans with splitter can be managed by the motherboard, to create a customized ARGB lighting system. Motherboard Support - Micro ATX, Mini ITX Tempered Glass: Hardware, custom-loop cooling, or the pure pride of showing off the build in panoramic view through an edge-to-edge tempered glass side panel. Adaptable Drive Cage: The drive cage is movable, able to shift toward the front to accommodate for PSU space, backwards to provide additional radiator space, or even completely removed. Versatile Cooling Options: Support a total of six 120mm fans, front, top and rear radiator placement to ensure no compromise on cooling performance.
Case Form Factor Mid-Tower Material Aluminum Steel Plastic mesh front Motherboard supporting Mini-ITX Micro-ATX ATX E-ATX (support upto 12" x 10.7") Maximum GPU Length 41.2 CM Expansion Slots 7+2 Slots Internal 2.5" Bays 2 Bays Internal 3.5" Bays 2 Bays 140mm Fans Included 1 Fans I/O Interface USB 3.0 x 2 USB 2.0 x 2 Audio In & Out (supports HD Audio) Case specification link http://www.coolermaster.com/case/mid-tower/mastercase-h500p/
Polygonal Mesh features a three-dimensional contour and is also capable of simultaneously providing high airflow and dust filtration. A crystalline tempered glass side panel dons a crystalline design, precision engineered for strength as well as aesthetics Three included addressable RGB fans flood the build with lighting while providing considerable airflow. For enthusiast-grade cooling, two 360 millimeter radiators are supported on the top and front panel to keep the most extreme systems cool. Support for up to seven 120 millimeter fans and front, top, and rear liquid cooling ensure the utmost in performance.
ABKONCORE C800 RGB 3X ARGB Fans and 120mm REAR RGB Fan Tempered Glass
Case Form Factor Mid-Tower Material Steel Tempered Glass Plastic Motherboard supporting ATX Micro ATX Mini ITX Expansion Slots 7 Internal 2.5" Bays 2 (HDD Tray) + 2 (ODD Cage) Internal 3.5" Bays 4(Tool-free) + 1 (ODD Cage) 120mm Fan Mount ARGB CONTROL RGB controller included 1 to3 RGB splitter cable included PRE-INSTALLED FANS - FRONT 3x 120mm ARGB Fan PRE-INSTALLED FANS - REAR 1x 120mm (Black) FAN SUPPORT - FRONT 3x 120mm 2x 140mm FAN SUPPORT - TOP 2x 120mm 2x 140mm FAN SUPPORT - REAR 1x 120mm I/O Interface 2x USB 3.0 Audio In & Out (supports HD audio) Case specification link https://www.coolermaster.com/catalog/cases/mid-tower/masterbox-mb520-rgb/#Specifications
The Thermaltake View 51 TG Snow ARGB is a specially constructed full tower case from the View Series chassis which comes with two preinstalled white 200mm 5V ARGB fans at the front, one preinstalled white 120mm 5V ARGB fan at the rear, and can support motherboards up to E-ATX (up to 10.5” wide).
ABKONCORE H250X PREMIUM TEMPERED GLASS 4 FLOWER FANS MID TOWER CASE BLACK
Venom X Arctic (E-ATX, USB3.0x1+2.0x2,Front & Left TG, Front 3xCY120 & Rear 1xCY120 Fans) Venom X is an innovative product of gaming PC case from XIGMATEK. It’s features are tempered glass panels at left and front side to perfectly display every component of the build, clearance for 158 mm CPU coolers, 380 mm GPU clearance and liquid cooling radiators compatible (up to 240 mm at front side & 120mm at rear side). The PSU shroud is for cable management with a more tidy display. This chassis is beautiful inside and outside, you’re in for a treat
Venom X (E-ATX, USB3.0x1+USB2.0x2, Front & Left TG, Front 3xCX120 & Rear 1xCX120 ,ans) Venom X is an innovative product of gaming PC case from XIGMATEK. It’s features are tempered glass panels at left and front side to perfectly display every component of the build, clearance for 158 mm CPU coolers, 380 mm GPU clearance and liquid cooling radiators compatible (up to 240 mm at front side & 120mm at rear side). The PSU shroud is for cable management with a more tidy display. This chassis is beautiful inside and outside, you’re in for a treat
Mesh front panel with hidden look ARGB fans: Both the mesh and transparent front panel with hidden fan look for maximized airflow and offering a crystal-clear view of the ARGB Fan. When fan is turned off, you will have a clean sleek look of the case. When fan is on, you'll notice the beautiful rings in the front of the case. x4 ARGB Fans: Not 1, not 2, but with a whopping x4 addressable RGB fans are included in the F01 case, capable of operating quietly while moving high volumes of air with ARGB lighting effects. Tempered Glass Side Panel: Flex your gaming hardware, custom-loop cooling, anything you put inside your case is shown in a panoramic view through an edge-to-edge tempered glass side panel Optimized Airflow with Magnetic Dust Filter: Filtered ventilation on the top panel provides additional thermal support while also offering mounting options for future cooling upgrades with magnetic dust filter included.
Case Type: ATX full tower Front: tempered glass+aluminum Side: Tempered glass M/B Type: eeb(35. 5cm x 35. 5cm)/ ATX/ Micro-ATX Internal: 4 x 3. 5" Hdd(hot swap), 11 x 2. 5" Ssd
Trident (ATX,330mm Chassis,U3x1+U2x2,Front Meshed+Left TG,4PCS XDS120 ARGB Fan w LED Switch,Fx3+Rx1) ・Superior Airflow And Ventilation Chassis Design ・Multiple Cooling Fan Placement Up to 6 x 120mm ・Easy Cable Management ・Liquid Cooling Radiators Compatibility: Front 240mm, Rear 120mm and Top 240mm ・Bottom Mount Power Supply ・Removable & User-Friendly HDD Cage Installation
Take presentation to the next level with the Core P5 Open Frame chassis by Thermaltake. The fully modular design of the Core P5 allows flexibility for 3-way placement layouts (Wall mount, Horizontal and Vertical), dual GPU layout locations: Horizontal and
NYX ARGB (M-ATX, USB3.0x1 & 2.0x2, Left & Front TG,Front TG Silk Print, 3PCS XDS120 ARGB Fan w LED Switch) The NYX 3F chassis of Xigmatek can support two types of Motherboards as Micro-ATX and Mini-ITX which comes with front & left side tempered glass panels to display every component perfectly, clearance for 160 mm CPU coolers, 280 mm GPU clearance and can be quipped liquid cooling radiators compatible 120 mm at rear side. The PSU shroud designed for easy cable management with tidy display.
Compact ATX case that supports motherboards up to E-ATX. 4mm Tempered Glass providing great view and safety. 4 A-RGB fans included, with convenient control. 210mm wide tower compartment with 23mm cable management clearance. A magnetic dustproof net on top and dust-filters at the front and bottom.
A compact ATX computer case supports motherboards up to E-ATX. Full sized 4mm thickness, tempered glass side panel and the front panel give the case a unique look and perfectly show off your inner structure. Full sized 4mm thickness, tempered glass side panel and the front panel give the case a unique look and perfectly show off your inner structure. Supports installation of 120/140/240/280/360mm radiator liquid cooling system in the front, 120/140/240mm radiator liquid cooling system on top and 120mm radiator liquid cooling system in the back. Supports 370mm (MAX) long Graphic Card installation.
Tempered glass side & front panels. 24mm clearance to help with cable management. Magnetic dust-proof net on top & dust-filters in the front and bottom. Two large air intakes on the front panel. includes 4x120 ARGB fans.
Vortex (ATX, USB3.0x1+USB2.0x2, Rainbow LED Front Panel, Left Tempered Glass, Rear SYNC XCR120 Fan) • Stylish RGB Stripe Front Panel and Left Side Tempered Glass • Superior Airflow and Ventilation Chassis Design • Multiple Cooling Fan Placement up to 5 x 120mm • Liquid Cooling Radiators Compatibility: Rear 120mm • CPU Cooler Clearance 160mm • VGA Length Limitation 290mm • Easy Cable Management
Super High Air-Flow - Beautiful diamond shape creates unique visual and enhance airflow. Pull Out Tempered Glass - The Air X ARGB uses an intuitive sliding mechanism that eliminates the need for mounting holes. The I/O Design - The front panel comes with USB 3.0*2, USB2.0*1 and LED button. All the ARGB fans have already connected to the controller, providing easy access and control of the three fans through the LED button. Excellent Dust Resistance - A total of 3 dusts at the front & top & bottom, which make the case easy to clean. Two 200mm + 120mm Addressable RGB Fans + Controller - The Air X ARGB features a total of three ARGB fans that can be fully customized and controlled by the led button on the case or the ARGB compatible mainboards (5V 3pin).
High-airflow design - Big area of airflowing at the front, top, bottom and the back ARGB Light Strip - Can easily controlled by the LED button. Also can sync with motherboard: Compatible with ASUS, Gigabyte and MSI motherboards (sync). Note: It will Only work with the motherboard with 5V 3pin not 12V 4Pin Unique mesh side - With the mesh at sides, ensuring the exceptional industrial style look and the best airflow Dust proof - Dust filters (magnetic) at the front & top & bottom, which make the case easy to clean Full Screen Tempered Glass Side Panel - Make the overall case look sharp and clean Cable Management - Equipped with Montech’s velcro cable ties Two 12 cm black frame white blade silent fans pre-installed at front and rear Support for a total of 8 fans & water cooling (Front 28 cm/36 cm,Top 24 cm/28 cm) USB 3.0*2/USB 2.0 *2/mic/headset/LED control button MOTHERBOARD SUPPORT: Mini-ITX, Micro-ATX, ATX and E-ATX
Autoflow Rainbow Fan - Rainbow fan*4 pre-Installed make your system cool and beautiful. Fans are autoflow and not controllable Tempered Glass Side Panel - Full transparent tempered glass side panel that can showcase your build High Airflow - Airflow is maximized by incorporating mesh front panel, top panel ventilation, and rear exhaust. And the four RGB fans make great overall cooling performance
Color - Black silver /Size - ATX Case/Dimension - 473mm×226mm×519mm(L×W×H)/Material - ABS+SPCC+Tempered Glass Expansion Slots - 7 Slots /Case Drive Bays - 2.5" x 2 , 3.5" x 2 /Power Supply - ATX PS2 I/O Panel - Audio×1, USB3.0 Type-A×2 Pre-installed Fans - Pre-installed:Front:120mmx3 A-RGB fan; Rear:120mm x1 A-RGB fan/Fan Support - Pre-installed:Front:120mmx3 A-RGB fan; Rear:120mm x1 A-RGB fan Optional: Front: 120mm×3/140mm×2, Top: 120mm×2 Rear: 120mm×1/Radiator Support - Front: 120/140/240/280/360; Rear: 120; TOP: 120/240
A compact ATX computer case supports motherboards up to E-ATX. Pre-installed 3PCs of 120mm add-rgb fans (CF120) Two extra connectors are ready to sync with the motherboard TO control any combination of DeepCool/gamer Storm 5V add-rgb devices and also other brand 5V add-rgb devices. Full sized 4mm thickness, tempered glass Side panel and the front panel give the case a unique look and perfectly Show off your inner structure. Supports installation of 120/140/240/280/360mm radiator Liquid Cooling system in the front